Power Button; Reset Button - Honeywell Marathon Reference Manual

Power Button

The power (on/off) button
power button turns the Marathon On.
If the Marathon is On, Windows determines the results of a power button press based on user configuration. For example, the
Marathon may be configured to:
Shut down
l
Hibernate
l
Ignore the power button press
l
Ask user to choose.
l
Power button behavior is configured by selecting:
Start > Settings > Control Panel > Power Options > Advanced
Start > Control Panel > Power Options > Advanced
Pressing and holding the power switch for several seconds forces a shutdown.
The Marathon is designed for a controlled shutdown when using the power button. A controlled shutdown first closes any open
programs, and then shuts down the Windows operating system. When the main battery is discharged, DO NOT remove
external power from the Marathon without first shutting down the Marathon.
The Marathon shutdown may be initiated in any of the following ways:
Selecting the Shutdown option from the Windows Start Menu.
l
Selecting the Shutdown option from the Windows Task Manager. The Windows Task Manager is opened by pressing
l
Ctrl-Alt-Del and clicking the Task Manager button.
Momentarily pressing and releasing the power button. The Marathon behavior when the power button is pressed can be
l
configured in the Power Options Control Panel.
Pressing and holding the power button for approximately five seconds. Any open programs and the Windows operating
l
system are shut down before power off. Note that this option must be used to shut down when the operating system is
not responding.
For more information on the Windows shutdown process, refer to Help and Support on the Windows Start menu
or commercially available Windows guides.

Reset Button

Use with caution. The Reset button
the Marathon immediately disconnects all power sources. The Marathon turns Off (uncontrolled shutdown).
is a push button located on the upper right corner of the Marathon. If the Marathon is Off, pressing the
is on the right side of the Marathon. Press the Reset button in with the tip of the stylus and
2-3