Restart/Shutdown; Calibrate Touch Screen; On-Screen Keyboard - Honeywell Marathon Reference Manual

Restart/Shutdown

Use the Windows interface to restart or shut down the Marathon.
Tap Start > Shut Down > Restart
l
Tap Start > Shut Down > Shut down
l

Calibrate Touch Screen

To calibrate the touch screen, tap Start > Programs > PenMount Universal Driver > Utility > PenMount Control Panel.
Select PenMount 6000 USB and then tap Configure. Select Standard Calibration or Advance Calibration.
Advanced Calibration allows the user to select the number of calibration points. With either option, follow the on screen
instructions to touch the red square, hold the touch and then lift the stylus to complete the calibration process.

On-Screen Keyboard

Windows 7 Professional only
Start > Control Panel > Ease of Access Center
Single use: Click Use On-Screen Keyboard. The on-screen keyboard is available immediately. It is not available after a
reboot.
Persistent use: Click Use the computer without a mouse or keyboard. Enable (check) Use On-Screen Keyboard. Click
Apply. The on-screen keyboard is available immediately. The on-screen keyboard is displayed upon every reboot. Click the
taskbar icon to minimize the keyboard until needed.
To disable the On-Screen Keyboard, select Start > Control Panel > Ease of Access Center. Click Use the computer
without a mouse or keyboard. Disable (uncheck) Use On-Screen Keyboard. Click Apply.
1-10