Panasonic KX-TDA5480 Programming Manual page 27

Parameter Descriptions
The parameters indicated with "*" must be changed while the VoIP Gateway Card is in the "STOP"
status (see "2.3.1 Status Control"). The changes do not have to be followed by a reboot to become
effective.
Hunt Group
The parameters below are used to assign VoIP gateway ports 1 and 2 to the hunt groups.
For details, refer to "Detailed Explanations".
Parameter
* Port 1
* Port 2
Hunt Pattern Entry
The parameters below are used to create hunt patterns.
For details, refer to "Detailed Explanations".
Parameter & Description
* Hunt Pattern No.
Specifies the number for the hunt pattern to be
created.
When changing the current settings of an existing hunt
pattern, first delete the hunt pattern and then re-create
with new values.
* Receive Leading Number
Specifies the leading digits in received numbers by
which to determine the hunt group to direct incoming
calls.
For example, to direct incoming calls with numbers
starting with "9", specify the number "9" in this
parameter. Likewise, to direct incoming calls with
numbers starting with "1", specify the number "1".
However, if you want to direct incoming calls with
numbers starting with "950" and "951" to separate hunt
groups, it is necessary to make two hunt patterns with
respective numbers, "950" and "951".
* Hunt Group (Priority1)
Specifies the hunt group to which incoming calls are
directed first.
Default Value Range
Hunt Group 1 Hunt Group 1,
Hunt Group 2
Hunt Group 1 Hunt Group 1,
Hunt Group 2
Default Value Range
No default 1 to 16
No default Max. 30 digits
1 1, 2
Programming Guide
2.2 Programming
27