Advertisement

Quick Links

Impact Wrench
MODEL 6905B
MODEL 6906
I N S T R U C T I O N
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
DOUBLE
INSULATION
M A N U A L
005305

Advertisement

Table of Contents
loading

Summary of Contents for Makita 6905B

  • Page 1 Impact Wrench MODEL 6905B MODEL 6906 005305 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
  • Page 2: Specifications

    • Note: Specifications may differ from country to country. END201-2 SYMBOLS For Model 6905B The following show the symbols used for the tool. Be For European countries only sure that you understand their meaning before use. Noise and Vibration The typical A-weighted noise levels are ....Read instruction manual.
  • Page 3: General Safety Rules

    MAKITA INTERNATIONAL EUROPE LTD. EC-DECLARATION OF CONFORMITY Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 We declare under our sole responsibility that this product 8JD, ENGLAND is in compliance with the following standards of stand- Responsible manufacturer: ardized documents, EN60745, EN55014, EN61000 in Makita Corporation Anjo Aichi Japan accordance with Council Directives, 89/336/EEC, 98/37/ Yasuhiko Kanzaki CE 2005...
  • Page 4: Specific Safety Rules

    13. Do not overreach. Keep proper footing and bal- the power tool or these instructions to operate ance at all times. This enables better control of the the power tool. Power tools are dangerous in the power tool in unexpected situations. hands of untrained users.
  • Page 5: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Switch action 002312 CAUTION: • Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF”...
  • Page 6: Operation

    (4080) Rated voltage fastening time for your bolt or nut. For 6905B (3060) The fastening torque is affected by a wide variety of factors including the fol- 90% of rated voltage (2040) lowing.
  • Page 7: Maintenance

    MAINTENANCE CAUTION: • Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Replacing carbon brushes 001145 Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark. Keep the carbon brushes clean and free to slip in the holders.
  • Page 8 Makita Corporation Anjo, Aichi, Japan 883054D226...

This manual is also suitable for:

6906

Table of Contents