Clearing Ipx Mls Cache Entries - Cisco 6500 Series Software Configuration Manual

Hide thumbs Also See for 6500 Series:
Table of Contents

Advertisement

Chapter 20
Configuring IPX Unicast Layer 3 Switching on Supervisor Engine 1
Vlan 1 Statistics Information:
-------------------------------
65280 Layer 2 Packets Bridged, 0 Bytes
65280 Layer 3 Packets Input, 0 Bytes
65280 Layer 3 Packets Output, 0 Bytes
Slot 3
=======
Vlan 1 Statistics Information:
-------------------------------
65280 Layer 2 Packets Bridged, 0 Bytes
65280 Layer 3 Packets Input, 0 Bytes
65280 Layer 3 Packets Output, 0 Bytes
Slot 4
=======
Vlan 1 Statistics Information:
-------------------------------
65280 Layer 2 Packets Bridged, 0 Bytes
65280 Layer 3 Packets Input, 0 Bytes
65280 Layer 3 Packets Output, 0 Bytes
Slot 5
(Information Deleted)

Clearing IPX MLS Cache Entries

Clear IPX shortcut entries in the Layer 3 table based on the entered criteria. The clear mls ipx command
clears shortcut entries in the Layer 3 tables matching configured parameters. If none of the following
parameters are entered, all IPX Layer 3 entries in the table are cleared:
To clear the IPX MLS statistics, perform this task:
Command
Router# clear mls ipx [exclude protocol [all port
1-96 | tcp port 1-96 | udp port 1-96] | [destination
[hostname | ipx_address] interface {{vlan vlan_ID} |
1
{type
slot/port} | {port-channel number}} | macd
destination_mac_address | macs source_mac_address]]
1. type = ethernet, fastethernet, gigabitethernet, or tengigabitethernet
This example shows how to clear the MLS cache entries in the Layer 3 table IPX interface, Fast Ethernet
interface 5/5:
Router# clear mls ipx interface fastethernet 5/5
Router#
To display the MLS entries and confirm they have been cleared, see the
Information" section on page
78-14099-04
destination or source—Describes the IPX addresses of the origin and termination points being
purged.
interface and its arguments must be specified, which limits the purge to entries associated with the
specified interface.
macd (MAC destination) or macs (MAC source)—Specifies the source port or destination
interface arguments to consider when searching for entries to purge.
slot—Clears only the entries associated with a specific slot number.
20-8.
Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide—Release 12.1 E
Purpose
Clears the IPX MLS statistics.
Clearing IPX MLS Cache Entries
"Displaying IPX MLS
20-13

Advertisement

Table of Contents
loading

Table of Contents