Configuring Cisco Ip Phone Support; Understanding Cisco Ip Phone Support; Cisco Ip Phone Connections - Cisco 6500 Series Software Configuration Manual

Configuring Cisco IP Phone Support

This chapter describes how to configure support for Cisco IP Phones on the Catalyst 6500 series
switches. Release 12.1(13)E and later releases support Cisco IP Phones.
For complete syntax and usage information for the commands used in this chapter, refer to the
Note
Catalyst 6500 Series Switch Cisco IOS Command Reference publication for this release.
This chapter consists of these sections:
•
•
•
•
Understanding
These sections describe Cisco IP Phone support:
•
•
•
•

Cisco IP Phone Connections

The Cisco IP Phone contains an integrated 3-port 10/100 switch. The ports are dedicated connections to
these devices:
•
•
•
Figure 11-1
78-14099-04
Understanding Cisco IP Phone Support, page 11-1
Default Cisco IP Phone Support Configuration, page 11-4
Cisco IP Phone Support Configuration Guidelines and Restrictions, page 11-4
Configuring Cisco IP Phone Support, page 11-5
Cisco IP Phone Support
Cisco IP Phone Connections, page 11-1
Cisco IP Phone Voice Traffic, page 11-2
Cisco IP Phone Data Traffic, page 11-3
Cisco IP Phone Power Configurations, page 11-3
Port 1 connects to the switch.
Port 2 is an internal 10/100 interface that carries the Cisco IP Phone traffic.
Port 3 connects to a PC or other device.
shows a Cisco IP Phone connected between a switch and a PC.
Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide—Release 12.1 E
C H A P T E R
11
11-1