Features - Honeywell ScanDome ll HTX-3000 Instruction Manual

1.1 Features

This keyboard controller is capable to control 32 ScanDomeII™ dome cameras and remote control
functions for variety of external switching devices like Multiplexer(max 255) etc...
The keyboard controller features:
• The capability of control a camera's panning and tilting movement with variable speed from 0.5 °/sec
to 90°/sec as well as its zoom, focus, and iris command. Normal speed is inversely proportional to
the current zoom ratio. Turbo speed is Max 380°/sec when Ctrl key pressed.
•
The ability to define and recall up to 240 presets, which are immediate camera call-ups of preset
position view, with automatic zoom and focus.
•
The ability to define and run up to 8 patterns, which comprise a sequential series of pan, tilt, zoom,
and focus movements from a single camera.
•
The ability to define and run up to 8 scans, which scan between two limits.
•
The capability to incorporate up to 300 of the presets, patterns, scan and tour itself in up to 8 tours,
where the presets, patterns and scan automatically displayed one after the other on the Main monitor.
•
Global preset recalls preset of all dome cameras.
•
Auto Iris mode activated by moving the joystick slightly.
•
Auto Focus mode is activated by twisting the zoom handle slightly.
•
Programmable user preferences (alarm, preset, title, etc.).
•
Administrator and user, two levels of password are supported for higher security.
•
One Master and slave Keyboard is supported to control in a distant place.
•
Multiplexers (Max 255) can be controlled remotely.
•
Up to two programmed data from domes can be downloaded to none volatile memory space in KBD,
and uploads to a new dome.
Alarm Input
UP TO 8
Alarm
Output
UP TO 4
UP TO 32 CAMERA
Slave Keyboard
Chapter 1
INTRODUCITON
UP TO 255 MULTIPLEXER
<Sensor>
<Siren>
<Flashing Light>
Figure 1 – Typical system Configuration
J-box
J-box
6
Master Keyboard