Honeywell ScanDome ll HTX-3000 Instruction Manual page 11

2.1.4 Two Multiplexer with Slave Keyboard Controller
AWG # 24
BNC
1ST MAIN MONITOR
1ST MULTIPLEXER
Spot output 1 of the first multiplexer to be connected to 16
n: User, Spot out of n
nd
out of the 2 multiplexer to be connected to the n
picture of the selected camera (1~(31-n)) on n
No.+Cam.
POWER POWER
AC 24V AC 24V
BNC
BNC
th
to be connected to (15-n)
Figure 5 – Two Multiplexer with Slave Keyboard Controller
POWER
AC 24V
(RS-422)
SPOT MONITOR SPOT MONITOR
FOR SLAVE K/B FOR MASTER K/B
2ND MULTIPLEXER
RS-485(+) PIN No.4
RS-485(-) PIN No.5
th
input of the second multiplexer.
th
camera input of the 2
th
use spot monitor. Each user will see the
th
spot monitor of the Mux 2 by selecting camera
11
2ND MAIN MONITOR
BNC
nd th
multiplexer. n spot