Makita 9553NB Instruction Manual page 8

ASSEMBLY
9553NB
2
1. Wheel guard
2. Screw
3. Bearing box
9554NB/9555NB
2
1. Wheel guard
2. Screw
3. Bearing box
8
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing side grip (handle)
005804
CAUTION:
• Always be sure that the side grip is installed securely
before operation.
Screw the side grip securely on the position of the tool as
shown in the figure.
Installing or removing wheel guard
005805
1
CAUTION:
3
• When using a depressed center grinding wheel/Multi-
disc, flex wheel, wire wheel brush or cut-off wheel, the
wheel guard must be fitted on the tool so that the closed
side of the guard always points toward the operator.
Mount the wheel guard with the protrusion on the wheel
guard band aligned with the notch on the bearing box. Then
rotate the wheel guard around 180 degrees. Be sure to
tighten the screw securely.
005807
To remove wheel guard, follow the installation procedure in
1
reverse.
3