Makita LS0815F Instruction Manual page 3

･
LASER RADIATION: Do not stare into
beam. Direct laser beam may injure
your eyes.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European Directive,
on Waste
Equipment and its implementation in
accordance with national law, electric
equipment that have reached the end of
their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for accurate straight and miter
cutting in wood. With appropriate saw blades, aluminum
can also be sawed.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted
according to EN61029:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN61029:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Electric and Electronic
noise level determined
) : 87 dB (A)
pA
) : 110 dB (A)
WA
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Slide Compound Miter Saw
Model No./ Type:
LS0815F, LS0815FL, LS0815FL GBA
ENE006-1
Conforms to the following European Directives:
2006/42/EC,
2006/65/EC
They are manufactured in accordance with the following
Standard or standardized documents:
ENF002-2
EN61029, EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3
The Technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
ENG905-1
000331
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
ENG900-1
SAFETY INSTRUCTIONS
sum)
WARNING! When using electric tools, basic safety
precautions, including the following, should always
be followed to reduce the risk of fire, electric shock
and personal injury. Read all these instructions
before operating this product and save these
ENG901-1
instructions.
For safe operations:
1. Keep work area clean.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose power tools to rain. Do not use
power tools in damp or wet locations. Keep work
area well lit. Do not use power tools where there
is risk to cause fire or explosion.
3
2006/95/EC, 2006/108/EC,
20.12.2013
Yasushi Fukaya
Director
ENH103-1
ENA001-2