Enable Dmz - NETGEAR AirCard 785 User Manual

The default password is password. The password is case-sensitive.
4. Click the Sign In button.
5. Select Settings > Router > Basic.
6. In the LAN section, click the VPN Passthrough Mode Enabled radio button.
The Submit button displays after you make a selection.
7. Click the Submit button.
Your changes are saved.

Enable DMZ

In a demilitarized zone (DMZ) network configuration, a computer runs outside the firewall in
the DMZ. This computer intercepts incoming Internet traffic, providing an extra layer of
protection for the rest of the network, and sending all incoming data to a particular IP
address.
To enable DMZ and designate a computer to screen incoming traffic:

1. Launch a web browser from a computer or WiFi device that is connected to the network.
AirCard 785 Mobile Hotspot
Advanced Settings
54