Sd Card Write/Read Test; Sd Card Report - Casio SE-S400 Service Manual

[6] SD Card Test (Write/Read, Report)

[6-1] SD Card Write/Read Test

[Function]
Writes the text file for the test (test.txt) on the SD card and tests whether the written file can be read.
[IMPORTANT]
The test result shows NG if you use a write-protected SD card.
The text file written during the test (test.txt) will not be erased.
If the SD card contains a file with the same name (test.txt), delete "text.txt" file first before
performing the SD card check.
[Operation]
Command : n 0 1 4 k
n: Number of times to run
0 Once (Can be omitted)
1 ~ 9 Infinite loop (To forcibly terminate the test, press the C
[Display of the Result]
SD WR
[Printout of the Result]
SD
SD WR
END

[6-1] SD Card Report

[Function]
Prints out the memory size of the SD card and its write-protection status.
[Operation]
Command : n 6 1 4 k
n: Number of times to run
0 Once (Can be omitted)
1 ~ 9 Infinite loop (To forcibly terminate the test, press the C
[Display of the Result]
SD SIZE
[Printout of the Result]
SD
Size = 3767 MB
WriteProtect = OFF
SD SIZE
END
SE-S3000/PCR-T2300/PCR-T2400/SE-C3500
OK
14
OK
14
OK
614
OK
614
– 24 –
SE-S400/PCR-T500/PCR-T520/SE-C450/
key.)
key.)