Casio SE-S3000 Dealer's Manual
  1. Manuals
  2. Brands
  3. Casio Manuals
  4. Cash Register
  5. SE-S3000
  6. Dealer's manual

Casio SE-S3000 Dealer's Manual

Hide thumbs Also See for SE-S3000:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Operating Manual
Dealer's Manual
(for SE-S400, SE-S3000, SE-C450, SE-C3500:Ver1.0)
Initialization (for SE-S400/SE-S3000)...................................................................3
Initializing the cash register .......................................................................................... 3
Automatic initialization ............................................................................................. 3
Manual initialization ................................................................................................. 3
Initialization (for SE-C450/SE-C3500) ..................................................................4
Initializing the cash register .......................................................................................... 4
Automatic initialization ............................................................................................. 4
Manual initialization ................................................................................................. 4
Initialization ............................................................................................................5
Clearing a machine lock up .......................................................................................... 5
For SE-S400/SE-S3000 ............................................................................................................... 5
For SE-C450/SE-C3500 ............................................................................................................... 5
Scanning PLU ........................................................................................................6
Summary ................................................................................................................. 6
Preparation ............................................................................................................. 6
Registration .............................................................................................................. 7
Not found PLU .............................................................................................................................. 7
Unreadable barcode ..................................................................................................................... 8
Programming ........................................................................................................... 8
To allocate <OBR> key ................................................................................................................. 8
Report ...................................................................................................................... 9
To issue individual scanning PLU item report ............................................................................... 9
To issue individual scanning PLU item report ............................................................................... 9
To reset all scanning PLU item sales data .................................................................................... 9
Advanced operation for scanning PLU .................................................................. 10
To issue inactive scanning PLU report ....................................................................................... 10
About sales data storage in an SD card ............................................................ 11
CSV file format of the sales data ............................................................................12
Parameter Sheet ..................................................................................................13
Key allocation (Program 4) ..........................................................................................13
Key function/machine feature (Program 3) ..................................................................17
Character (Program 2) ............................................................................................... 52
Unit price/rate (Program 1) ......................................................................................... 61
Program reading (Program 6) .................................................................................... 65
Appendix ..............................................................................................................73
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
MA1307-C
291DEALER_1307EU_ID

Advertisement

Table of Contents
loading

Related Manuals for Casio SE-S3000

Summary of Contents for Casio SE-S3000

  • Page 1: Table Of Contents

    Dealer’s Manual (for SE-S400, SE-S3000, SE-C450, SE-C3500:Ver1.0) Initialization (for SE-S400/SE-S3000)..............3 Initializing the cash register ..................3 Automatic initialization ..................... 3 Manual initialization ....................3 Initialization (for SE-C450/SE-C3500) ..............4 Initializing the cash register ..................4 Automatic initialization ..................... 4 Manual initialization ....................4 Initialization ......................5...
  • Page 2 Caution ! efore connecting peripheral devices to the COM port, turn the mode switch to the “OFF” position (step 1) and disconnect the power plug from AC outlet (step 2). X2/Z2...

  • Page 3: Initialization (For Se-S400/Se-S3000)

    1. Insert the mode key marked “PGM” into the mode switch. 2. Turn the mode switch to the OFF position. 3. While holding down the f (SE-S400) j (SE-S3000) key, turn the mode switch to the PGM position. 4. Release the f (SE-S400) j (SE-S3000) key.

  • Page 4: Initialization (For Se-C450/Se-C3500)

    Initialization (for SE-C450/SE-C3500) Initializing the cash register Automatic initialization Use the following procedure to initialize the cash register before using it for the first time after you purchase it. 1. Install the two memory backup batteries. 2. Plug the cash register into a wall outlet. 3.

  • Page 5: Initialization

    2. Insert the PGM key in the mode switch. 3. Press down and hold f (SE-S400) f (SE-S3000), and turn the mode switch to PGM mode. 4. The display shows INIT (SE-S400)/FC (SE-S3000) on alpha-display, then release f (SE-S400) f (SE-S3000).

  • Page 6: Scanning Plu

    Scanning PLU Summary You can easily register items with barcode label by using barcode scanner. Without programming any PLU code, unit price nor linked department, you can register the items and create the PLU programming data automatically by not found PLU registration. You can input the PLU code by scanning the code or enter the PLU code and press ®...

  • Page 7: Registration

    Scanning PLU Registration Mode Switch Not found PLU OPERATION DISPLAY Barcode 123456 Unit price $1.00 Item Scanning the barcode Quantity Error message Department Payment Cash $2.00 1−! Link department name Enter unit price of the item and press the ap- propriate department.

  • Page 8: Unreadable Barcode

    [Mode to PGM] >▪▪▪▪▪> (select “System Setting”) ▪▪▪▪▪▪▪▪▪▪▪▪ To allocate <OBR> key Refer to the “Keyboard layout change” chapter of this manual (SE-S400/SE-S3000,SE-C450/SE- C3500). (The function code of the <OBR> is “103”.) To modify unit price and linked department/add new scanning PLU item...

  • Page 9: Report

    Scanning PLU Report To issue individual scanning PLU item report Operation ________________________________ Report __________________________________ To another PLU — Read symbol/report title INDIVIDUAL Scanning DEPT001 — Item name/No. of items 8.13% •257.53 — Sales ratio*/amount #49012349 ® — PLU code * barcode PLU0001 —...

  • Page 10: Advanced Operation For Scanning Plu

    Scanning PLU Advanced operation for scanning PLU To issue inactive scanning PLU report Operation ________________________________ Report __________________________________ — Read symbol/report title NON ACTIVE — Report code 0090026 6 90026a 6 — Link department/Dept No. DEPT001 ..001 — Item name/No. of items PLU0001 Mode —...

  • Page 11: About Sales Data Storage In An Sd Card

    Issuing lump X report on March 13, 2013. ↓ The following files are created. ↓ ↓ \CASIO\SE3000\XZ2013\03\X001_13.CSV X002_13.CSV X005_13.CSV X011_13.CSV ↓ Issuing lump X report on the same day. ↓ \CASIO\SE3000\XZ2013\03\X001_13A.CSV (with the extension “A”) X002_13A.CSV (ditto) X005_13A.CSV (ditto) X011_13A.CSV (ditto)

  • Page 12: Csv File Format Of The Sales Data

    About sales data storage in an SD card CSV file format of the sales data Sales data are stored in the CSV format as described below. Number of fields vary by the type of the totalizer. “MODEL ” , “ ”...

  • Page 13: Parameter Sheet

    Key allocation (Program 4) Key allocation program Programming procedure Refer to page 8 to enter the program mode. 64s6 Select “System Setting” To other key This step can be skipped for transaction key. Set the same function 6 : ~ : 6 : : : 6 Record No.
  • Page 14 SE-S400/SE-S3000 (for US and Canada) R-FEED J-FEED FEED Only for SE-S3000 Only for SE-S400 Only for SE-S3000 SUBTOTAL SE-S400/SE-S3000 (for Europe and other countries) R-FEED J-FEED FEED Only for SE-S3000 Only for SE-S400 SUBTOTAL SE-C450/SE-C3500 (for US and Canada) Only for SE-C450...
  • Page 15 CHAR Merchandise subtotal Three zero MDST Minus − Multiplication/Date/Time Two zero New balance New check NEW CHK * This function cannot be allocated on SE-S400/SE-S3000. <00>, <000>, and <.> functions are only allocated to <#011> or <#012> keys. Parameter Sheet...
  • Page 16 Key allocation programming (P4) Issuing program reading report of program 4 mode Issuing procedure Refer to page 8 to enter the program mode. 64s6s Select “System Setting” Report sample — Program read symbol ....1−−−−−−−−−−−−−−−−−−−−−−−−−− — Function character/rec-#/file-# 0015−02 — Hard key code/function code 011−096 0009−02 012−098...

  • Page 17: Key Function/Machine Feature (Program 3)

    Key function/machine feature (Program 3) General control program Programming procedure Refer to page 8 to enter the program mode. 63s6 : : 22s 6 : : ~ : : a6s Select “System Setting” Address code (2 digits) Program data (Max. 10 digits) Program data (by address code) Address code 01 (date order) Description...
  • Page 18 Key function/machine feature (P3) Address code 04 (tax system, rounding, etc.) Description Choice Program code Initial value Apply rounding for registration: No rounding = 0, IF1 = 1, IF2 = 2, Danish = 3, Norwegian = 4, Significant number Singaporean = 5, Finnish = 6, Australian, Canadian = 7, South (0~9) African = 8, Other roundings = 9 (Refer to D Tax system:...
  • Page 19 Address code 05 (print control for receipt) Description Choice Program code Initial value Yes = 0 Print total line during finalization. No = 1 (a+b) (a+b) Time system: 1 = 0 1 24 hour system, 2 12 hour system 2 = 2 No = 0 Buffered receipt print Yes = 2...
  • Page 20 1 Do not maintain, 2 Until next menu shift specification 2 = 1 ; ; ; ; ; ; ; ; Always “0000” ; ; ; ; ; ; Always “000” This program is not effective for SE-S400 and SE-S3000.
  • Page 21 Address code 08 (print control for fixed total report) Description Choice Program code Initial value Yes = 0 Print gross sales total on fixed total report. (GROSS) No = 1 Yes = 0 Print net sales total on fixed total report. (NET) (a+b+c) (a+b+c) No = 2...
  • Page 22 Key function/machine feature (P3) Address code 09 (print control for fixed total report) Description Choice Program code Initial value Yes = 0 Print taxable amount 1 total on fixed total report. (TA1) No = 1 (a+b) (a+b) Yes = 0 Print tax 1 total on fixed total report.
  • Page 23 Address code 10 (print control for taxable amount, till timer) Description Choice Program code Initial value Yes = 0 Print taxable amount 1 on receipt/journal No = 1 Yes = 0 Print taxable amount 2 on receipt/journal (a+b+c) (a+b+c) No = 2 Yes = 0 Print taxable amount 3 on receipt/journal No = 4...
  • Page 24 Key function/machine feature (P3) Address code 15 (print control for reports) Description Choice Program code Initial value Yes = 0 Zero skip department report. No = 1 (a+b) (a+b) Yes = 0 Zero skip clerk report. No = 2 Yes = 0 Zero skip transaction key report.
  • Page 25 Address code 16 (print control for grand total) Description Choice Program code Initial value Contents of the periodic 1 total: Significant number • Normal registration only = 0, • Training registration only = 1, (0~2) • Both normal and training registration = 2 Contents of the periodic 2 total: Significant number •...
  • Page 26 Key function/machine feature (P3) Address code 17 (print control) Description Choice Program code Initial value Whenever pressing <PLUS>, <MINUS>, or <COUPON> after <ST>, the No = 0 amount registered is proportioned amount all taxable amout. Yes = 2 Rounding of commission: Significant number Round off = 0, Cut off = 1, Round up = 2 (0~2)
  • Page 27 Address code 19 (double height character) Description Choice Program code Initial value No = 0 Print double-height characters. Yes = 1 ; ; ; ; ; ; Always “000” ; ; ; ; ; ; Always “000” Address code 21 (message control) Description Choice Program code...
  • Page 28 Key function/machine feature (P3) Address code 25 (condiment etc.) Description Choice Program code Initial value (Australia) (other area) Always “0” No = 0 Restrict (to 0 or 5) on the last one digit for amount tender. Yes = 1 (Australia) Yes = 0 Obey registration quantities of child PLU to its parent PLU.
  • Page 29 Address code 28 (Euro) Description Choice Program code Initial value Yes = 0 Define Euro as main currency. No = 1 Select rounding option: Significant number Round off = 0, Cut off = 1, Round up = 2 (0~2) : : : : : : ;...
  • Page 30 Key function/machine feature (P3) Address code 30 (thermal printer control) Description Choice Program code Initial value No = 0 Print preset receipt message and graphic. Yes = 1 (a+b) (a+b) Print preset receipt message and graphic: 1 = 0 1 at the bottom of the receipt, 2 at the top of the receipt 2 = 2 Yes = 0 Journal compressed print (print by half height characters)
  • Page 31 Department key/flat-PLU key/PLU program (Batch feature programming) Programming procedure Refer to page 8 to enter the program mode. Department/flat-PLU key Department 6 : ~ : 6 63s 6 Program data Select Flat-PLU “System Setting” (14 digits) To another department/flat-PLU key To a new (not sequential) PLU Different program to the next PLU 63s6 + 6 : ~ : 6a6s...
  • Page 32 Key function/machine feature (P3) Taxable status for the U.S./Singapore Always “0” No = 0 Taxable 1 status Yes = 1 No = 0 Taxable 2 status (a+b+c) Yes = 2 No = 0 Taxable 3 status Yes = 4 for Canada Non tax = 00 Taxable 3 = 03 Taxable 1 &...
  • Page 33 Department key/flat-PLU key/PLU program (Individual feature programming) Programming procedure Refer to page 8 to enter the program mode. Department/flat-PLU key Department 63s 6: : 66s6 6 : ~ : 6 Flat-PLU Select Address code Program data “System Setting” Same program To another department/flat-PLU key 63s 6: : 66s6 +6 : ~ : 6a6s...
  • Page 34 Key function/machine feature (P3) Other address code Address Description Choice Program code code Single item control: Significant number Normal receipt = 0, Single item receipt = 3 Multiplication registration is enable. No = 0 (Only effective for scanning PLU linked to this department.) Yes = 2 Normal/Condiment/Preparation (Not for department) Significant number...
  • Page 35 Transaction key program Programming procedure Refer to page 8 to enter the program mode. To another transaction key 63s 6: ~ : 6 Transaction key Select Program data “System Setting” Program data <CASH>, <CHARGE>, <CHECK> Description Choice Program code Restriction (to 00, 50) on last two digits for amount tendered. No = 0 (Only for <CASH>...
  • Page 36 Key function/machine feature (P3) <CREDIT> Description Choice Program code No = 0 Disable operation in RF/REG– mode. Yes = 1 (a+b) No = 0 Disable operation in REG mode. Yes = 4 Always “0” No = 0 Prohibit entry of a partial payment. Yes = 1 No = 0 Prohibit the entry of the amount tendered.
  • Page 37 <TIP> Description Choice Program code No = 0 Disable operation in RF/REG– mode. Yes = 1 (a+b) No = 0 Disable operation in REG mode. Yes = 4 ;; ;; ; Always “00000” High digit limitation (HDL) for manually entered unit price. Significant number (“9”...
  • Page 38 Key function/machine feature (P3) <+ (PLUS)>, <- (MINUS)>, <COUPON> Description Choice Program code No = 0 Disable operation in RF/REG– mode. Yes = 1 (a+b) No = 0 Disable operation in REG mode. Yes = 4 Taxable status: See below. No = 0 Allow credit balance.( —, Or CPN only) Yes = 1...
  • Page 39 <PREMIUM (%+)>, <DISCOUNT (%-)> Description Choice Program code No = 0 Disable operation in RF/REG– mode. Yes = 1 (a+b) No = 0 Disable operation in REG mode. Yes = 4 Taxable status: See below. No = 0 Prohibit manual rate override. Yes = 2 Rounding: Significant number...
  • Page 40 Key function/machine feature (P3) <MANUAL TAX> Description Choice Program code No = 0 Disable operation in RF/REG– mode. Yes = 1 (a+b) No = 0 Disable operation in REG mode. Yes = 4 ; ; ; ; ; Always “00000” High digit limitation (HDL) for manually entered unit price Significant number (“9”...
  • Page 41 <RECEIPT> Description Choice Program code No = 0 Disable operation in RF/REG– mode. Yes = 1 (a+b) No = 0 Disable operation in REG mode. Yes = 4 Always “0” No = 0 Print current time on guest receipt. Yes = 4 Yes = 0 Clear finalized check.
  • Page 42 Key function/machine feature (P3) <ARRANGEMENT> Description Choice Program code Yes = 0 Enable operation in X mode. No = 1 Yes = 0 Enable operation in Z mode. (a+b+c) No = 2 Yes = 0 Enable operation in X2/Z2 mode. No = 4 Yes = 0 Enable operation in RF/REG–...
  • Page 43 <TAX SHIFT> Description Choice Program code No = 0 Disable operation in RF/REG– mode. Yes = 1 (a+b) No = 0 Disable operation in REG mode. Yes = 4 Taxable status (00, 01~04) (“00” means taxable 1.) ; ; ; ; ; ; Always “000000”...
  • Page 44 Key function/machine feature (P3) <SUBTOTAL>, <MERCHANDISE SUBTOTAL> Description Choice Program code No = 0 Disable operation in RF/REG– mode. Yes = 1 (a+b) No = 0 Disable operation in REG mode. Yes = 4 Always “00” Yes = 0 Include add-on tax. (<SUBTOTAL> only) No = 1 (a+b) No = 0...
  • Page 45 <CANCEL> Description Choice Program code No = 0 Disable operation in RF/REG– mode. Yes = 1 (a+b) No = 0 Disable operation in REG mode. Yes = 4 Always “0” ; ; ; ; ; ; Always “000000” Always “0” <TEXT RECALL>, <REFUND>, <NO SALE>, <VAT>, <PLU>, <PRICE>, <NEW CHECK>, <NEW/OLD CHECK>, <OLD CHECK>, <ADD CHECK>, <DATE/TIME>, <OBR>, <MENU SHIFT>, <SIGN OFF>, <DEPT SHIFT/DEPT NO>...
  • Page 46 Key function/machine feature (P3) Clerk program Secret number, check number programming Refer to page 8 to enter the program mode. Programming procedure To a new (not sequential) clerk To the next clerk 63s 6: : 07s6: : ~ : : 6a6s Select Record No.
  • Page 47 Other programs Set menu programming Refer to page 8 to enter the program mode. Programming procedure To a new (not sequential) record To the next record Maximum 15 items can be set. Flat 63s 6: : 28s6 6a6s : ~ : 6+ Select Record No.
  • Page 48 Key function/machine feature (P3) Arrangement programming Refer to page 8 to enter the program mode. Programming procedure 63s 6: : 38s6A6: ~ : a6 Select Arrangement table No. (up to 6 digits) Record No. “System Setting” 6: ~ : 6A6s Key operations * The same should be pressed.
  • Page 49 I/O parameter table programming Refer to page 8 to enter the program mode. Programming procedure To a new record To the next record 63s 6: : 98s6: ~ : 6a6s Select Record No. Program data “System Setting” Note: Please perform the following procedure after this program. 1.
  • Page 50 Key function/machine feature (P3) Scanning PLU maintenance programming Scanning PLU direct maintenance programming Refer to page 8 to enter the program mode. Programming procedure  63s 60071s6 Select “System Setting” Code 6: ~ : 6a6 ― ― 6: 6a6 Scanning Action code Unit price ...
  • Page 51 Issuing program reading report of program 3 mode Issuing procedure Refer to page 8 to enter the program mode. 63s6s Select “System Setting” Report sample — Program read symbol ....— Batch X/Z program DAILY X 0001−29 15−11−12−17−00 CHECK 0001−02 00−00−00−00−00 —...

  • Page 52: Character (Program 2)

    Character programming (P2) Character (Program 2) Programming descriptors Programming procedure Refer to page 8 to enter the program mode. To other address code To the next address code Rec No. File No. 62s 6: ~ : : : s6 6a6s Character Select Address code...
  • Page 53 Group character Up to 12 characters Address Contents Initial character code 0106 Group 01 GROUP01 0206 Group 02 GROUP02 0306 Group 03 GROUP03 5006 Group 50 GROUP50 Clerk character Up to 12 characters Address Contents Initial character code 0107 Clerk 01 0207 Clerk 02 0307...
  • Page 54 Character programming (P2) Special character Address Contents Initial character code U.S. $ @No/** main currency symbol (2), @ (2), No. (2), split pricing (2), not used (1) 0123 training filler (1), training symbol (1), not used (1), sub currency symbol (2) Others •...
  • Page 55 8123 X/Z header 07 (16) DATE 8223 X/Z header 08 (16) TIME 8323 X mode display (16) NEXT RC 8423 Z mode display (16) NEXT RC 8523 X2/Z2 mode display (16) XZ NEXT RC 8623 X1 title (16) PERIODIC READ 1 8723 Z1 title (16) PERIODIC RESET 1...
  • Page 56 Character programming (P2) Message Up to 24 characters Address Contents Initial character Yours code YOUR RECEIPT 0132 1st line of logo message THANK 0232 2nd line of logo message CALL AGAIN 0332 3rd line of logo message 0432 4th line of logo message 0532 1st line of commercial message 0632...
  • Page 57 Report header Up to 12 characters Address Contents Initial character code 0124 Fixed totalizer report 0224 Transaction key report TRANS 0324 PLU report 0424 Department report DEPT 0524 Group report GROUP 0624 Cashier/clerk report CASHIER 0724 Not used 0824 Hourly sales report HOURLY 0924 Monthly sales report...
  • Page 58 PLU No. Contents Initial character 0001 PLU0001 PLU0001 0002 PLU0002 PLU0002 0003 PLU0003 PLU0003 3000* PLU3000 PLU3000 * Maximum number of the PLU varies by the mode. 3000 for models SE-S400 and SE-C450, 7000 for models SE-S3000 and SE- C3500.
  • Page 59 Transaction key Up to 12 characters Function Code Initial character Function Code Initial character Add check New/old check ADD CHK NEW/OLD Age verification No sale Arrangement Non-add Cancel Non-add/No sale CANCEL #/NS Cash amount tendered CASH Charge Old check OLD CHK CHARGE Check tender Open...
  • Page 60 Character programming (P2) Issuing program reading report of program 2 mode Issuing procedure Refer to page 8 to enter the program mode. 62s6s Select “System Setting” Report sample — Program read symbol ....0001−32 — Receipt message YOUR RECEIPT GROSS 0001−01 0002−32 NET...

  • Page 61: Unit Price/Rate (Program 1)

    Unit price/rate (Program 1) Date/time setting Refer to page 8 to enter the program mode. Date setting 61s 6: : : : : : 6 Select Year Month “System Setting” Year range: 00~99 61s 620: : : : : : 6 Select Year Month...
  • Page 62 Unit price/rate programming (P1) Unit price program Programming procedure Refer to page 8 to enter the program mode. Programming the unit price (to department/flat-PLU key) Department 6 : ~ : 6 61s 6 Select Unit price Flat-PLU “System Setting” (6 digits) To another department/flat-PLU key Programming the unit price (to PLU) To a new (not sequential) PLU...
  • Page 63 Rate program Refer to page 8 to enter the program mode. <CURRENCY EXCHANGE> 61s 6: : : : ^: : : : 6E6s Select Integer Decimal “System Setting” (Max. 4-digits) (Max. 4-digits) Preset rate Example: $1.00 = ¥97.84 2 0^9784 ¥100 = $1.0221 2 1^0221...
  • Page 64 Unit price/rate programming (P1) Issuing program reading report of program 1 mode Issuing procedure Refer to page 8 to enter the program mode. 61s6s Select “System Setting” Report sample — Program read symbol ....— Transaction key unit price or rate −...

  • Page 65: Program Reading (Program 6)

    Program reading (Program 6) Issuing program reading report Issuing procedure Refer to page 8 to enter the program mode. Reading by file 66s 6: : : s Select Reading code “System Setting” Reading by range 66s 6: : : s6: ~ : a6: ~ : a Select Reading code Start rec-#...
  • Page 66 Program reading (P6) Report sample Fixed totalizer — Program 2 mode symbol ....— Fixed totalizer descriptor/rec-#/file-# GROSS 0001−01 NET 0002−01 CAID 0003−01 CHTL 0004−01 Transaction key Program 1 — Program 1 mode symbol ....— Transaction key descriptor/rate 12.43% %− 10.24% Program 2 —...
  • Page 67 Program 1 — Program 1 mode symbol ....— PLU range #0001 − #0010 — PLU descriptor/rec-#/file-# PLU0001 0001−04 — Unit price @10.00 PLU0002 0002−04 @30.00 Program 2 — Program 2 mode symbol ....— PLU range #0001 − #0010 — PLU descriptor/rec-#/file-# PLU0001 0001−04 PLU0002 0002−04 PLU0003 0003−04...
  • Page 68 Program reading (P6) Department Program 1 — Program 1 mode symbol ....— Department range #0001 − #0010 — Department descriptor/rec-#/file-# DEPT001 0001−05 — Unit price @10.00 DEPT002 0002−05 @30.00 Program 2 — Program 2 mode symbol ....— Department range #0001 − #0010 — Department descriptor/rec-#/file-# DEPT001 0001−05 DEPT002...
  • Page 69 Clerk Program 2 — Program 2 mode symbol P02....— Clerk range #0001 − #0010 — Clerk descriptor/rec-#/file-# C01 0001−07 C02 0002−07 C03 0003−07 Program 3 — Program 3 mode symbol P03....— Clerk range #0001 − #0010 — Clerk descriptor/rec-#/file-# C01 0001−07 — Check-#/drawer-#/secret-# 000001000001 —...
  • Page 70 Program reading (P6) Grand total — Program 2 mode symbol ....— Grand total descriptor/rec-#/file-# 0001−20 0002−20 0003−20 LAST GT 0004−20 General control — Program 3 mode symbol ....— Rec-#/file-#/program data 0001−22 2200000000 0002−22 0000000000 0003−22 0000000000 Special character — Program 2 mode symbol ....
  • Page 71 Set menu table — Program 3 mode symbol ....— Rec-#/file-# 0001−28 — Linked PLU descriptor/rec-#/file-# PLU0001 0001−04 PLU0002 0002−04 Batch X/Z Program 2 — Program 2 mode symbol ....— Batch report descriptor/rec-#/file-# DAILY X 0001−29 Program 3 — Program 3 mode symbol ....— Batch report descriptor/rec-#/file-# DAILY X 0001−29...
  • Page 72 Program reading (P6) Receipt message — Program 2 mode symbol ....— Rec-#/file-# 0001−32 — Message ************************ 0002−32 ** LOGO MESSAGE ** Arrangement table — Program 3 mode symbol ....— Rec-#/file-#/arrangement table -# 0001−38 000001 — Function descriptor/key-#/function-# REG1 204−000 001−000 002−000 DEPT01 026−051 Character recall —...

  • Page 73: Appendix

    Appendix Application IPL procedure Preparation Prepare an SD card in which application module is contained. Replacement of application software Disconnect the power plug. Turn the mode key to “PGM” then, while pressing down the key, connect the power plug. For one printer models, insert the power plug while pressing key down.
  • Page 74 1. Power off the register. 2. Insert the PGM key in the mode switch. 3. Press down and hold f (SE-S400/SE-C450) f (SE-S3000/SE-C3500), and turn the mode switch to PGM mode. 4. The display shows INIT (SE-S400/SE-C450)/FC (SE-S3000/SE-C3500) on alpha-display, then release f (SE-S400/SE-C450) f (SE-S3000/SE-C3500).

This manual is also suitable for:

Se-s400Se-c450Se-c3500

Table of Contents