Networkservices Medianet Metadata - Cisco TelePresence MX200 Administrator's Manual

Cisco TelePresence MX200 and MX300
Contents
NetworkServices HTTPS OCSP URL
Specify the URL of the OCSP responder (server) that will be used to check the certificate
status.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
NetworkServices HTTPS OCSP URL: "http://ocspserver.company.com:81"
Example:

NetworkServices Medianet Metadata

Switch On or Off the capability to tag media flows with metadata related to the Cisco Medianet
deployment.
Requires user role: ADMIN
Value space: <Off/On>
Off: Media flows will not be tagged with such metadata.
On: Media flows will be tagged with such metadata.
NetworkServices Medianet Metadata: Off
Example:
NetworkServices NTP Mode
The Network Time Protocol (NTP) is used to synchronize the system's time and date to a
reference time server. The time server will be queried regularly for time updates.
Requires user role: ADMIN
Value space: <Auto/Manual/Off>
Auto: The system will use an NTP server for time reference. As default, the server address
will be obtained from the network's DHCP server. If a DHCP server is not used, or if the
DHCP server does not provide an NTP server address, the NTP server address that is
specified in the NetworkServices NTP Address setting will be used.
Manual: The system will use the NTP server that is specified in the NetworkServices NTP
Address setting for time reference.
Off: The system will not use an NTP server. The Network Services NTP Address setting will
be ignored.
NetworkServices NTP Mode: Auto
Example:
D14850.12 MX200 and MX300 Administrator Guide TC7.3, JULY 2015.
Introduction Web interface System settings System settings
NetworkServices NTP Address
The address of the NTP server that will be used when NetworkServices NTP Mode is set to
Manual, and when NetworkServices NTP Mode is set to Auto and no address is supplied by a
DHCP server.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: A valid IPv4 address, IPv6 address or DNS name.
NetworkServices NTP Address: "0.tandberg.pool.ntp.org"
Example:
NetworkServices SNMP Mode
SNMP (Simple Network Management Protocol) is used in network management systems to
monitor network-attached devices (routers, servers, switches, projectors, etc) for conditions
that warrant administrative attention. SNMP exposes management data in the form of variables
on the managed systems, which describe the system configuration. These variables can then
be queried (set to ReadOnly) and sometimes set (set to ReadWrite) by managing applications.
Requires user role: ADMIN
Value space: <Off/ReadOnly/ReadWrite>
Off: Disable the SNMP network service.
ReadOnly: Enable the SNMP network service for queries only.
ReadWrite: Enable the SNMP network service for both queries and commands.
NetworkServices SNMP Mode: ReadOnly
Example:
NetworkServices SNMP Host [1..3] Address
Enter the address of up to three SNMP Managers.
The system's SNMP Agent (in the codec) responds to requests from SNMP Managers (a PC
program etc.), for example about system location and system contact. SNMP traps are not
supported.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: A valid IPv4 address, IPv6 address or DNS name.
NetworkServices SNMP Host 1 Address: ""
Example:
www.cisco.com — Copyright © 2011–2015 Cisco Systems, Inc. All rights reserved.
81
Administrator Guide
Setting passwords Appendices