Advertisement
MAINTENANCE
CAUTION :
Always be sure that the tool is switched off and unplugged before attempting t o perform
inspection or maintenance.
Replacing carbon brushes
Remove and check the carbon brushes
regularly. Replace when they wear down t o
the limit mark. Keep the carbon brushes
clean and free t o slip in the holders. Both
carbon brushes should be replaced
a t
the
same time. Use only Makita carbon brushes.
Limit mark
Fig. 1 1
Use a screwdriver to remove the brush
holder caps. Take out the worn carbon
brushes, insert the new ones and secure
the brush holder caps.
Brush holder
cap
I
Fig. 1 :
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or
adjustment should be performed by Makita Authorized or Factory Service Centers,
always using Makita replacement parts.
9
Advertisement
