Advertisement
FOR
USE AS A POLISHER
For polishing operation, assemble the tool
.
as
a t
right. Hold the spindle firmly with
the wrench 17. Put on the rubber pad, then
tighten lock nut using the lock nut wrench
provided, turning clockwise. Next, put
wool bonnet on, fastening it securely with
strings
as
snugly as possible, near the
center. Tuck in the loose ends of the cord
in between the wool bonnet and the rubber
pad.
CAUTION :
Loose cord ends when using the wool
bonnet can be very dangerous. Always tuck
them safety in out of the way.
Lock
nut wrench
.
Fig.
8
Fig.
9
Operat ion
When polishing, keep the angle a t about
15
degrees and work gently in the direction
the polisher is turning.
Fig.
I O
8
Advertisement
