Advertisement
HOW TO USE
Installing side grip (auxiliary handle)
Screw the side grip on the tool securely.
The side grip can be installed on either
side of the tool, whichever is convenient.
Switch action
To start the tool, simply pull the trigger.
Release the trigger t o stop. For continuous
operation without having to keep your
finger on the trigger, just pull the trigger
and then push in the lock button with
your thumb. To stop the tool from the
lock position, simply pull the trigger again
and release it.
Speed changes
I f the knob on the switch lever in front i s
turned to the "H" setting, the high speed is
obtained; if set t o the
"L"
setting, the low
speed results. Use the suitable speed setting
in order to obtain the best performance
and finish.
High speed
. . . . . .
For disc sanding
Low speed
. . . . . .
For polishing
I
Fig.
Switch trigger
\ '
\
Lock button
Fig.
:
Fig. 2
5
Advertisement
