External View And Internal Structure; Identification Of Each Section And Functions - Sharp MX-2300 G Service Manual

[5] EXTERNAL VIEW AND INTERNAL STRUCTURE

MX2700N

1. Identification of each section and functions

A. External view
1
When the auto document
feeder is not installed:
No. Name
1 Document cover
2 Auto document feeder *1, *2
3 Front cover
4 Interface unit *1
5 Operation panel
6 Paper exit tray unit (Right tray) *1
7 Paper exit tray (Center tray)
8 Finisher *1
9 Saddle stitch finisher *1
10 Tray 1
11 Tray 2
12 Tray 3 (When the stand/1 x 500 sheet
paper drawer or the stand/2 x 500 sheet
paper drawer is installed) *1
13 Tray 4 (When the stand/2 x 500 sheet
paper drawer is installed) *1
14 Tray 5 (When the large capacity paper
feed tray is installed) *1
*1: Peripheral unit (option): The peripheral units are options. Some model is provided with this unit as a standard unit.
*2: The MX-2300N/2700N are equipped standard with peripheral unit.
2
9
Holds a document.
This automatically feeds and scans multiple originals. Both sides of two-sided
originals can be automatically scanned.
Open this cover when turning ON/OFF the main power switch or replacing
the toner cartridge.
Feeds the output paper to the saddle finisher.
Used to set the functions and enter the copy quantity.
Receives discharged paper if installed and set.
Copied or printed paper is discharged to this tray.
Staples paper, and makes punch holes if the punch unit is installed.
Staples and outputs paper. It is also provided with the center-stapling
function. Makes punch holes if the punch unit is installed.
Stores paper. Max. 500 sheets (80g/m
Stores paper. Max. 500 sheets (80g/m
Stores paper. Max. 500 sheets (80g/m
Stores paper. Max. 500 sheets (80g/m
Stores paper. Max. 3500 sheets (80g/m
MX-2300/2700 N/G EXTERNAL VIEW AND INTERNAL STRUCTURE 5 – 1
Service Manual
3 4 5 6
10 11 12 13 14
Function/ Operation
2
, 21lbs)
2
, 21lbs)
2
, 21lbs)
2 , 21lbs)
2
, 21lbs)
7
When the options (the finisher, the
paper pass unit, and the saddle stitch
finisher) are not installed.
When the option (the finisher) is
installed (When the option (the
saddle stitch finisher) is not installed.).
Note
8