Disassembly Procedures - Yamaha RX-Z11 Service Manual

RX-Z11/DSP-Z11
I DISASSEMBLY PROCEDURES
Disconnect the power cable from the AC outlet.
The disassembly procedure of this unit is described by
sections as follows.
• Disassembly procedures of Front section:
When removing the front panel and sub-chassis unit
When removing the power transformer, POWER (2)
and POWER (3) P.C.B.s
• Disassembly procedures of Side section:
When removing MAIN L and MAIN R P.C.B.s
When removing speaker terminals
When removing INPUT (2) and SUBCPU (1) P.C.B.s
• Disassembly procedures of Rear section:
When removing DVIDEO and DSP P.C.B.s
When removing P.C.B.s for audio/video input/output
• Disassembly procedures of Bottom section:
When removing fuses and fans
When removing AMPPOW (1) P.C.B.
18