Scan To Fax Server - Dell 2335dn User Manual

2.
3.
4. When the option you want to set appears, press Select (
5. Change the setting using the Scroll (
6. Press Select (
7. Repeat steps 3 through 6 , as needed.
8. Press Cancel (

Scan to Fax Server

Fax server will decipher the fax/e-mail data to send out the job. The e-mail is automatically processed by fax
server and sent to the given recipient.
First, the printer sends the scanned data to the fax server. Then, the fax server uses PSTN to send a fax/e-
mail data to recipient.
To use fax server features as scan to e-mail, you first need to configure the network settings. See "Dell
Printer Configuration Web Tool" for network parameters.
1. Press Scroll (
2. Press Scroll (
3. Enter the remote fax phone number using the number keypad.
4. If you place a single document face down on the document glass, skip to step 6 .
5. Press Scroll (
Select (
Off : For originals that are printed on one side only.
2side : For originals that are printed on both sides.
2->1 side rotate : For originals that are printed on both sides. But the back is rotated 180
degrees.
6. Press Start (
The printer begins scanning and then sends the fax.
7. Press Cancel (
Downloaded from ManualsPrinter.com Manuals
or
) to save the selection.
) to return to the Standby mode.
or ) to highlight Scan and then press Select (
or ) to highlight Fax Server and then press Select (
or ) to highlight the duplex option, Off , 2side or 2->1 side rotate and then press
).
) or Select (
) to return to the Standby mode.
) to access the option.
) buttons or enter the value using the number keypad.
).
).
).