During First Use; Turning On The Appliance And Setting The Thermostat - Baumatic BF207BLM Instruction Manual

During first use

o When you first switch on the appliance, the compressor will run
continuously for approximately 24 hours or until the fridge
freezer reaches a cool enough temperature.
o During this period of time, you should try not to open the door
frequently or place a large amount of food within the appliance.
o If the unit is switched off or unplugged, you must allow at least 5
minutes before restarting the appliance on the thermostat or
reconnecting it to your mains supply.

Turning on the appliance and setting the thermostat

You switch on your appliance by connecting it to your mains supply
and setting the thermostat. The thermostat is located on the upper
right hand side of the inside of the cabinet, next to the interior light.
o The thermostat automatically regulates the temperature inside
the fridge freezer, depending on what number you have turned
the thermostat control knob to.
o Position <0> means that the appliance will not cool. However
the light will still function.
o Position <1> will give you a higher temperature inside the fridge
freezer.
o Position <7> will give you a lower temperature inside the fridge
freezer.
o Ideally the thermostat should be set to a position between <3>
and <4>.
o The fridge section can maintain a temperature of between 4 – 6
degrees centigrade.
o The freezer section can cool down to -18°C and lower.
Downloaded from Fridge-Manual.com Manuals
10