Digital Radio Basic Operation - Kenwood DNX5350BT Instruction Manual

Return to the Top page
Radio Operation
Digital Radio Basic Operation (DNX5350DAB only)
Most functions can be controlled from the source control screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see
mode (P.107).
List Control screen
1
2
1 Artwork area
The picture data is displayed if available from current content.
2 Multi function key
Touch to switch the multi function menu. For details on the menu, see
3 Preset key/Multi function menu
Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving
station or channel in memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see
4 List switching key
Touch to switch between the preset list and the information list.
5 Sub function menu
The following functions can be performed by using keys in this area.
• Display the list type screen: Touch [
• Tunes in a ensemble, service, and component:
Touch [1] [¡]. The method of ensemble, service, and component switching can be changed. See
Multi function menu
• Display the Dynamic Label Segment screen: Touch [DLS].
• Change the Replay mode: Touch [
6 Label infomation
Displays the list of preset service.
Displays the information of the current service: Service Label, PTY Label, Ensemble Label, Audio Quality,
Now playing, Next program, Title, Artist
7 Signal Strength indication/Channel display
Displays the received signal strength of the Digital Radio station.
Displays the received channel number display.
62 62
3
4
Multi function menu
]. See
(P.61).
Replay
]. See
Simple Control screen
7
6
5
Multi function menu
(P.61).
Selecting Operation (P.65).
(P.67).
Switching the operation
1
(P.61).