Radio Operation; Radio Basic Operation - Kenwood DNX5350BT Instruction Manual

Return to the Top page

Radio Operation

R
adio Operation

Radio Basic Operation

Most functions can be controlled from the source control screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see
mode (P.107).
Simple Control screen
1
2
3
1 PS/Station name display (FM Tuner only)
Displays the PS name.
2 Information display/Control switching area
Displays the following information.
• [FM1] etc.: Band display
• MHz/kHz: Frequency display
• Preset #: Preset number
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
Touch to switch the multi function menu. For details on the menu, see
4 Preset key/Multi function menu
Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving
station or channel in memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see
5 Sub function key
Touch to display "Sub function menu" (7 in this table).
6 Preset list
Displays the list of preset stations or channels and the information.
60 60
4 5
Multi function menu (P.61).
Switching the operation
List Control screen
3
4
Multi function menu
2
6
7
8
(P.61).