Initial Setup - Kenwood DNX5350BT Instruction Manual

Initial setup

Perform this setup when you use this unit first time or when you reset the unit (P.113).
1
Set each item as follows.
Locale
Select the country for the navigation system.
The language, the distance unit, and the gasoline unit are set.
After setting, touch [Enter].
1 Touch [SET].
2 Select the desired country.
3 Touch [Enter].
Language
Select the language used for the control screen and setting items. Default is "British English (en)" for
models with region code 2/3/4 and "Chinese" for model with region code 6.
1 Touch [SET].
2 Touch [2] or [3] to select the desired language.
3 Touch [Enter].
For detailed operation, see
Color
Set the screen and button illumination color. You can select whether to allow color scan operation or
select a fixed color for operation.
1 Touch [SET].
2 Touch [ON] or [OFF] of [Panel Color Scan].
3 If you want to change color, touch [SET] of [Panel Color Coordinate].
4 Touch your desired color and [6].
For detailed operation, see
Camera
Set the parameters for the camera.
1 Touch [SET].
2 Set each item and touch [
For detailed operation, see
Language setup (P.85).
Panel color coordinate (P.89).
].
Camera Setup (P.92).
Return to the Top page
Basic Operations
Continued
13