NETGEAR Nighthawk X4 R7500 Installation Manual page 6

4. Add power to the router.
Internet
DSL or
cable
a. Connect the power adapter to the router and plug the
power adapter into an outlet.
b. Wait for the Power LED
amber and turn white.
If no LEDs are lit, press the Power On/Off button on the
rear panel of the router.
5. Connect a computer.
Internet
DSL or
cable
You can use an Ethernet cable or connect with WiFi:
• For a wired connection, use an Ethernet cable (not included)
to connect your computer to a black Ethernet port on your
router.
• To connect with WiFi, use the WiFi settings on the router
label.
Ethernet
cable
Modem
Modem
Router
Power adapter
on the front panel to light
Router
Ethernet
cable
Power adapter
4
Ethernet
cable