NETGEAR Nighthawk X4 R7500 Installation Manual page 17

¾ To access the USB drive from a Mac:
1. Insert your USB storage drive into a blue USB 3.0 port on the
router.
2. If your USB drive has a power supply, you must use it when you
connect the USB drive to the router.
When you connect the USB drive to the router USB port, it
might take up to two minutes before it is ready for sharing. By
default, the USB drive is available to all computers on your local
area network (LAN).
3. Select Go > Connect to Server.
4. Enter smb://readyshare as the server address.
5. Click the Connect button.
15