9.3.4
Driving
The drive of each motor in the paper feeding area activates the paper transfer roller as follows.
Feeding motor
Timing belt
(M20)
Gear, Pulley
Registration motor
(M16)
Transport motor
(M17)
Tray-up motor-1
(M21)
Tray-up motor-2
(M22) (* For NAD, SAD and TWD (e-STUDIO600/720))
Tandem LCF Tray-up motor
(M41) (* Except for NAD, SAD and TWD (e-STUDIO600/720))
Tandem LCF end fence motor
(M42) (* Except for NAD, SAD and TWD (e-STUDIO600/720))
March 2005 © TOSHIBA TEC
[Feeding area of the drawer or tandem LCF]
Drawer feed clutch
(CLT6, 8, 10, 12)
Drawer pickup roller
Drawer feed roller
Drawer separation roller
[Bypass feeding area]
Gear
Bypass feed clutch
(CLT4)
Bypass pickup roller
Bypass Transport roller
Bypass separation roller
Timing belt
Registration roller
Pulley
Timing belt
Intermediate transport roller
Pulley
Tray in the first and second drawer
Tray in the third and fourth drawer
Tray of the Tandem LCF
Gear, Timing belt
9 - 9
Gear
Drawer transport clutch
(CLT5, 7, 9, 11)
Transport roller
End fence
e-STUDIO520/600/720/850 PAPER FEEDING SYSTEM
9