Baumatic BRLF1759SE User Manual page 19

5) Remove the door. Remove the hinge-pin hole cap from the top
of the door and insert it into the existing hinge-pin hole in the
opposite side, thus exposing the new hinge-pin hole and
covering the old hole.
6) Unscrew the plastic hinge-pin receiver from the
7) Place the door somewhere safe from damage.
NOTE: Ensure that all screws have been tightened securely.
IMPORTANT: Check that the door opens and shuts correctly,
without fouling, after you have completed the door reversal
process.
bottom of the door and relocate it to the opposite
side. There are pilot groves for the screws on the
opposite side.
8) Unscrew the hinge-pin from the top of the
appliance and relocate it to the opposite
side.
9) Reposition
appliance, slotting the door onto the
hinge-pin protruding from the top of the
appliance.
10) Insert the lower hinge-pin into the bottom of the
door and secure the lower hinge bracket to the
appliance using the original screws.
11) You can then re-attach the appliance feet and
stand the appliance back to it's upright position.
the door back onto the
19