Cisco PRP-2 Installation And Configuration Manual page 65

8.
DETAILED STEPS
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
OL-17436-01
reload
Command or Action
Connect a terminal to the primary RP
console port and log in to the router.
configure
Example:
Router# configure
config-register value
Example:
Router(config)# config-register 0x0
commit
Example:
Router(config)# commit
no config register 0x0
Example:
Router(config)# no config regsiter
0x0
commit
Example:
Router(config)# commit
Additional Configuration and Maintenance Tasks
Purpose
Connects a terminal or PC to the primary RP
console port and logs in to the router
Enters global configuration mode.
Sets the configuration register to the assigned
value in the running configuration.
See the Commonly Used Configuration
•
Register Value Settings
information.
Changes take effect when you reload the
•
router.
Resetting the configuration register
Caution
may change the baud rate for the
console.
Saves the changes to the running configuration.
Caution You must commit the setting and enter
the no config-register 0x0 command
for the settings to take effect.
Prevents unwanted changes to the configuration
register at a later point, and guarantees the setting
is the same between the Cisco IOS XR software
and the ROM monitor.
Saves the changes to the running configuration.
section for more
65