SET UP.
Got everything?
Setting up.
Note:
The Cisco SPA 112 does not
support PoE (Power over Ethernet),
so it will need to be plugged into
the mains.
This booklet is here to help you get started with your new analogue terminal adaptor.
It's very easy to set up and it won't take you long – just follow the simple instructions
below or have a look at the quick start guide instead
•
Cisco SPA 112 Phone Adaptor
•
Ethernet Cable
•
Mains power adapter and UK Plug
•
Phone Socket Adaptor
The first thing to do is connect the Internet Port (shown blue below) to your network
port using the Ethernet cable provided.
Then connect the power unit supplied to the DC 5V Power outlet on the adaptor
(shown below) and to a mains supply.
Finally, connect your analogue phone to the Phone 1 socket (below) using either the
supplied adaptor or directly if your phone has an Rj11 telephone cable.
Power supply
Ethernet
connection
Phone socket
3