Cisco ASR 1001-X Installation Manual page 96

Environmental Monitoring and Reporting Functions
P2
Slot
--------- ------------------- ---------------------------------------
0
R0
F0
The show platform software status control-processor command displays the average load, memory
usage, and CPU utilization levels at which the router is running. The output also specifies whether the
levels of these system health parameters are within defined thresholds.
The output does not display SIP-related information on a monolithic router.
Note
The following is sample output from the show platform software status control-processor command:
Example 5-6
Router# show platform software status control-processor
RP0: online, statistics updated 1 seconds ago
Load Average: healthy
1-Min: 0.00, status: healthy, under 8.00
5-Min: 0.03, status: healthy, under 8.00
15-Min: 0.07, status: healthy, under 10.00
Memory (kb): healthy
Total: 8092776
Used: 3491556 (43%)
Free: 4601220 (57%)
Committed: 3566404 (44%), status: healthy, under 95%
Per-core Statistics
CPU0: CPU Utilization (percentage of time spent)
User:
IRQ:
CPU1: CPU Utilization (percentage of time spent)
User:
IRQ:
CPU2: CPU Utilization (percentage of time spent)
User:
IRQ:
CPU3: CPU Utilization (percentage of time spent)
User:
IRQ:
CPU4: CPU Utilization (percentage of time spent)
User:
IRQ:
CPU5: CPU Utilization (percentage of time spent)
User:
IRQ:
CPU6: CPU Utilization (percentage of time spent)
User:
IRQ:
CPU7: CPU Utilization (percentage of time spent)
User:
IRQ:
The show diag chassis eeprom detail command displays the configuration hardware information,
including DRAM and Static RAM (SRAM) on line cards.
The following is sample output from the show diag chassis eeprom detail command:
Cisco ASR 1001-X Router Hardware Installation Guide
5-22
ASR1001-X-FANTRAY ok
CPLD Version Firmware Version
14041015 15.4(2r)S
14041015 15.4(2r)S
14041015 15.4(2r)S
show platform software status control-processor Command
0.00, System: 0.00, Nice:
0.00, SIRQ: 0.00, IOwait:
1.30, System: 0.40, Nice:
0.00, SIRQ: 0.00, IOwait:
0.49, System: 8.89, Nice:
0.00, SIRQ: 0.00, IOwait:
2.00, System: 0.40, Nice:
0.00, SIRQ: 0.00, IOwait:
0.00, System: 0.30, Nice:
0.00, SIRQ: 0.00, IOwait:
0.40, System: 0.10, Nice:
0.00, SIRQ: 0.00, IOwait:
0.40, System: 0.40, Nice:
0.00, SIRQ: 0.00, IOwait:
0.80, System: 1.30, Nice:
0.00, SIRQ: 0.00, IOwait:
Chapter 5 Cisco ASR 1001-X Router Power Up and Initial Configuration
00:33:47
0.00, Idle:100.00
0.00
0.00, Idle: 98.30
0.00
0.00, Idle: 90.60
0.00
0.00, Idle: 97.60
0.00
0.00, Idle: 99.69
0.00
0.00, Idle: 99.50
0.00
0.00, Idle: 99.19
0.00
0.00, Idle: 97.90
0.00
OL-32376-02