When the target camera has been added
successfully, the image transfer screen
will be displayed. Proceed to "Sending
Images"
•
To add multiple cameras, repeat this procedure from the first step.
•
Once a camera is added, the camera name will be displayed on the screen in
step 3. To connect to a camera again, simply choose the camera name from
the list.
•
Once you have assigned a connection destination to Touch Actions
you can prepare the camera to reconnect to the destination simply by dragging
across the screen with the assigned gesture.
(=
158).
(=
131),
Sending Images
Send images wirelessly to destinations registered on the camera as follows.
Note that when images are sent to a computer, the computer is used
instead of the camera
(=
160).
Sending Images Individually
1
Choose an image.
Turn the <7> dial to choose an image
to send.
2
Send the image.
Press the <q><r> buttons to choose
[Send this image], and then press the
<m> button.
When uploading to YouTube, read the
terms of service, choose [I Agree], and
press the <m> button.
Image transfer will begin. The screen
darkens during image transfer.
After images are uploaded to a Web
service, [OK] is displayed. Press the
<m> button to return to the playback
screen.
After sending images to a camera or
smartphone, [Transfer completed] will be
displayed, and the display will return to
the image transfer screen.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
158