Canon PowerShot G1X Mark II User Manual page 106

2
Configure the setting.
Press the <o><p> buttons or turn the
<7> dial to choose the ring or button for
assignment.
To assign functions to the ring or dial,
press the <m> button, choose the ring
or dial on the screen displayed (either
press the <o><p> buttons or turn the
<7> dial), and then press the <q><r>
buttons to choose the function.
To assign functions to the < > or <E>
button, press the <m> button, choose
the function on the screen displayed
(either press the <o><p><q><r>
buttons or turn the <7> dial), and then
press the <m> button.
3
Use the assigned function as
needed.
Turn < >< ><7> to configure the
assigned function.
When multiple functions are assigned to When multiple functions are assigned to When multiple functions are assigned to
the < > ring, press the <o> button to > button to > button to
switch between them.
Press the < > or <E> button to > button to > button to
activate the assigned function.
• When you assign [ ] or [ ] to the <
assigned button records white balance data
setting changes to [ ] or [ ].
• When you assign [%] to the < > or <E> button, each press of the
assigned button adjusts and locks the focus. [%] is then displayed.
• When you assign [ ] to the < > or <E> button, pressing the assigned
button deactivates screen display. To restore the display, do any of the
following.
- Press any button other than the ON/OFF button Press any button other than the ON/OFF button Press any button other than the ON/OFF button
- Hold the camera in another orientation Hold the camera in another orientation Hold the camera in another orientation
- Raise or lower the flash Raise or lower the flash Raise or lower the flash
• You can still record movies in [ You can still record movies in [ You can still record movies in [ ], [E] and [
function to the <E> button. function to the < function to the <
• On the setting screen, you can also configure the functions assigned to On the setting screen, you can also configure the functions assigned to On the setting screen, you can also configure the functions assigned to
controls by touching the functions to switch and then [ controls by touching the functions to switch and then [ controls by touching the functions to switch and then [
> or <E> button, each press of the
(= 84), and the white balance
] modes even if you assign a
].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
106