Choosing Images Individually; Selecting A Range - Canon PowerShot G1X Mark II User Manual

Choosing Images Individually

1
Choose [Select].
Following step 2 in "Choosing a Selection
Method"
press the <m> button.
2
Choose an image.
Press the <q><r> buttons or turn the
<7> dial to choose an image, and then
press the <m> button. [
To cancel selection, press the <m>
button again. [
Repeat this process to specify other
images.
3
Protect the image.
Press the <n> button. A
confirmation message is displayed.
Press the <q><r> buttons or turn the
<7> dial to choose [OK], and then press > dial to choose [OK], and then press > dial to choose [OK], and then press
the <m> button.
• Images will not be protected if you switch to Shooting mode or turn Images will not be protected if you switch to Shooting mode or turn Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3. the camera off before finishing the setup process in step 3. the camera off before finishing the setup process in step 3.
• You can also select or clear images by touching the screen in step 2, and you
can access the confirmation screen by touching [
• You can also protect images by touching [OK] on the screen in step 3.
(= 123), choose [Select] and
] is displayed.
] is no longer displayed.
].

Selecting a Range

1
Choose [Select Range].
Following step 2 in "Choosing a Selection
Method"
Range] and press the <m> button.
2
Choose a starting image.
Press the <m> button.
Press the <q><r> buttons or turn the
<7> dial to choose an image, and then
press the <m> button.
(= 123), choose [Select
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
124