•
After you set the shutter speed or aperture value, the exposure level
may change if you adjust the zoom or recompose the shot.
•
Screen brightness may change depending on your specified shutter
speed or aperture value. However, screen brightness remains the
same when the flash is up and the mode is set to [h].
•
Exposure may not be as expected when the ISO speed is set
to [
], because the ISO speed is adjusted to ensure standard
exposure relative to your specified shutter speed and aperture
value.
•
AE lock is only available when the ISO speed setting is [
•
[D]: Manual
•
Calculation of standard exposure is based on the specified metering method
(=
79).
Adjusting the Flash Output
Choose from the three flash levels in [D] mode.
].
Still Images
1
Enter [D] mode.
Set the mode dial to [D].
2
Set the flash mode.
Press the <n> button, choose [Flash
4
Control] on the [
] tab, and then press
the <m> button
(=
26).
Press the <o><p> buttons to choose
[Flash Mode], press the <q><r> buttons
to choose [Manual], and then press the
<n> button.
3
Configure the setting.
Raise the flash, press the <r> button and
immediately turn the <
> ring to choose
the flash level, and then press the <m>
button.
Once the setting is complete, the flash
output level is displayed.
[
] low, [
] medium, [
] high
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
104