Table of Contents
Advertisement
3. After POST is completed, the management module displays the results.
Refresh the window to view the POST results. If the error remains, the
Gigabit Ethernet switch module is defective. Replace the Gigabit Ethernet
switch module.
The following table describes the basic critical and noncritical failures. This
abbreviated list is representative; it is not intended as an exhaustive list. An
error code is associated with each failure. Error codes appear on the
Management Module Switch Information window. Be sure to note the
applicable error code and corresponding failure. You might have to provide
this information when you call the IBM HelpCenter
Chapter 7, "Getting help and technical assistance," on page 37.
Diagnostic indicator (in
hex)
00 - 7F
80 - 9F
A0 - AF
B0 - FE
FF
40
Cisco Systems Intelligent Gigabit Ethernet Switch Module: Installation Guide
Failing functional area
Base internal functions
Internal interface failures
External interface errors
Reserved
Gigabit Ethernet switch
module "good" indicator
®
. For details, see
Failure criticality
Critical
Noncritical
Noncritical
Noncritical
Operation
Advertisement
Table of Contents
