Cabinet Top Removal; Led Board Removal - Sanyo PLC-XP200L Service Manual

Mechanical Disassembly

2 Cabinet top removal

1 Open the filter cover and remove 1 screw A (M3x8).
 Remove 1 screw B (M3x8) and open the lamp cover
and remove 1 screw C (M3x8).
3 Remove 4 screws D (M3x8) on the cabinet top and 
screws E (M3x8) on the cabinet back.
4 Release the hooks by pressing the side part of cabinet
bottom indicated with the arrows and take the cabinet
top off.
LED board
F

2-1 LED board removal

1 Remove  screws F (T3x8) and take the LED board
and LED holder off.
Cabinet top
d
d d
d
F
e
e
c
A
-18-
Press here to unhook
B
Fig.
1-2