Coolant Level Check - Husqvarna 2011 TE 630 Workshop Manual

Coolant level check

Check level (1) in right-hand radiator when engine is cold (place the motorcycle
so that it is perpendicular to the ground). The coolant should be approximately
10 mm above cells and besides, it shall not exceed the middle of the expansion
tank (2) located in front of the rear shock absorber.
The radiator cap (3) features two locking positions, the first one is for prior di-
scharge of pressure from the cooling system.
Avoid removing radiator cap (3) when engine is hot, as coolant
may spout out and cause scalding.
Because the cooling fan (4) can be activated even when the start
switch is in OFF position, always keep at a safe distance from the
fan blades.
Difficulties may arise in eliminating coolant from painted surfaces.
If this occurs, wash off with water.
Part. N. 8000 H2051 (02-2010)
SETTINGS AND ADJUSTMENTS
D.13