Connecting Wires To Terminals - Kenwood KDC-X891 Instruction Manual

Connecting Wires to Terminals

To USB device
USB connector (1 m)
⁄
• Do not remove the cap when you
do not use the USB cable. The
connector will cause the unit to
malfunction if it gets in touch with
any metallic part of the vehicle.
• Fasten the connector with the
tape so that the cable will not
come off.
Fuse (10A)
Wiring harness (Accessory1)
FRONT • L
FRONT • R
REAR • L
REAR • R
Power control wire (Blue/White)
Motor antenna control wire (Blue)
TEL mute wire (Brown)
External amplifier control wire
(Pink/Black)
Dimmer control wire (Orange / White)
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) - (To car chassis)
Tape
To use the steering wheel
remote control feature,
you need to an exclusive
remote adapter (not
supplied) matches your car
is required.
REMO.CONT
Steering remote control
(Light Blue/Yellow)
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
If no connections are made, do not let the wire come out from the tab.
P.CONT
ANT.
CONT
MUTE
SUB
WOOFER
REAR
FRONT
FM/AM antenna input
To Kenwood disc changer/ External optional accessory
⁄
AUX input (Stereo)
Use the mini-plug which is stereo type and does not
have any resistance.
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
When using the optional power amplifier, connect to its power control
terminal.
Depending on what antenna you are using, connect either to the
control terminal of the motor antenna, or to the power terminal for the
booster amplifier of the film-type antenna.
Connect to the terminal that is grounded when either the telephone
rings or during conversation.
⁄
To connect the Kenwood navigation system, consult your
navigation manual.
To "EXT.AMP.CONT. " terminal of the amplifier having the external amp
control function.
To car light control switch
Car fuse box
ACC
Sub Woofer right output (Red)
Sub Woofer left output (White)
Rear right output (Red)
Rear left output (White)
Front right output (Red)
Front left output (White)
To connect these leads, refer to the relevant
instruction manuals.
Ignition key switch
Car fuse box (Main fuse)
Battery
– +
47
|
English