Connecting Wires To Terminals - Kenwood KDC-S2007 Instruction Manual

7 Connecting Wires to Terminals
English
| | FM/AM antenna input
If no connections are
Sr
—> eer
|
made, do not let the wire
come out from the tab.
Rear left output (White)
Rear right output (Red)
Fuse
Wiring harness (Accessory) [ []]
White/Black
Ignition wire (Red)
Car fuse box
Gray
Green/Black
© To rear Jeft
Battery wire (Yellow) —_ REAR t ) @ speaker
(Main fuse) Green
Purple/Black
Ground wire (Black) @(To car chassis) ewes © To rear right
: ker
Battery
spea
Purple
If you connect the ignition wire (red) and the battery wire
(yellow) to the car chassis (ground), you may cause a short
circuit, that in turn may start a fire. Always connect those wires
to the power source running through the fuse box.
,16
When only two speakers are being connected to the system, connect
the connectors either to both the front output terminals or to both the
rear output terminals (do not mix front and rear}. For example, if you
connect the i+: connector of the left speaker to a front output terminal,
do not connect the :- connector to a rear Output terminal.