Honeywell L5200 Series Installation And Setup Manual page 43

Program Reporting (Continued)
SCREEN
Report All
Press to Report All
Report Alarms
Disabled
Report Troubles
Disabled
Report Open/Close
Disabled
Report Tests
Disabled
Follow Me Phone 2
Phone Type
None
Phone Number
Report All
Press to Report All
Report Alarms
Enabled
Report Troubles
Enabled
Report Open/Close
Disabled
Report Tests
Enabled
Report Selection
Arm Away
Enabled
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "Report All". The System toggles between "Press to Report All" and "Report All Set".
If "Report All" is selected all reporting options will be "Enabled". Select the "Save" key to
return to the Reporter options screen.
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "Report Alarms". The System toggles between "Disabled" and "Enabled".
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "Report Troubles". The System toggles between "Disabled" and "Enabled".
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "Open/Close". The System toggles between "Disabled" and "Enabled".
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "Report Tests". The System toggles between "Disabled" and "Enabled".
Note: The Follow Me feature is not available on the LYNX Touch L7000/L7000CN.
Select "Follow Me Phone 2" to program the "Follow Me" Reminder telephone number 2.
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "Phone Type". The System toggles between "None" and "Follow Me".
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "Phone Number". Enter the "Follow Me" Phone Number 2 on the displayed keypad.
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "Report All". The System toggles between "Press to Report All" and "Report All Set".
If "Report All" is selected all reporting options will be "Enabled". Select the "Save" key to
return to the Reporter options screen.
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "Report Alarms". The System toggles between "Disabled" and "Enabled".
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "Report Troubles". The System toggles between "Disabled" and "Enabled".
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "Open/Close". The System toggles between "Disabled" and "Enabled".
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "Report Tests". The System toggles between "Disabled" and "Enabled".
Select "Report Selection". The System displays the following options:
Arm Away
Disarm
Recent Closing
Trouble
Use the down  arrow to scroll to the next page of options.
Alarm Restore
Test
Bypass
AC Loss
Use the down  arrow to scroll to the next page of options.
Low Battery
RF Low Battery
Select "Arm Away". The System toggles between "Disabled" and "Enabled".
LYNX Touch Installation and Setup Guide
Programming the Control
ACTION
Arm Stay
Exit Error
Event Log Full
Trouble Restore
Alarm Cancel
Test Restore
Bypass Restore
AC Loss Restore
Low Battery Restore
RF Low Battery Restore
- 43 -