Honeywell L5200 Series Installation And Setup Manual page 42

LYNX Touch Installation and Setup Guide
Programming the Control
Program Reporting (Continued)
SCREEN
Secondary CS Info
Phone Type
None
Communicator Type
None
Phone Number
Account Number
FFFF
Dynamic Priority
Redundant Reports
Dynamic Delay
30 Seconds
Report All
Press to Report All
Report Alarms
Enabled
Report Troubles
Enabled
Report Open/Close
Disabled
Report Tests
Enabled
Follow Me Phone 1
Phone Type
None
Phone Number
Select "Secondary CS Info". The System displays the following options:
Phone Type
Select "Phone Type". The System displays the following options:
None
Contact Id: 4 Digit
Contact Id: 10 Digit
SIA
Select "Communicator Type". The System displays the following options:
None
GSM
WiFi
WiFi & GSM
IP
Note: The system will display the communications path (GSM, WiFi or IP) selected in Communications
Programming. The path can be enabled for either primary Central Station or Secondary Central
Station but not both. If it is enabled in one it will not be available for the other Central Station.
If any option other than "None" is selected in "Phone Type", the "Phone Number" option will
be displayed. Select "Phone Number". Enter the Secondary Central Station Phone Number
on the displayed keypad. (Up to 20 digits)
If any option other than "None" is selected in "Phone Type" The "Account Number" option will
be displayed. Select "Account Number". Enter the Secondary Central Station Account
Number on the displayed keypad.
If any option other than "None" is selected in "Communicator Type" The "Dynamic Priority"
option will be displayed. "Select "Dynamic Priority". The system scrolls between "Redundant
Reports", "Preferred Telco" and Preferred Radio".
If any option other than "Redundant Reports" is selected in "Dynamic Priority" The "Dynamic
Delay" option will be displayed. "Select "Dynamic Delay". The system scrolls between "15
Seconds", "30 Seconds", "60 Seconds" and "90 Seconds".
Note: If GSM is selected as the primary reporting channel Dynamic Delay should be set to
minimum of 60 seconds.
Select "Report All". The System toggles between "Press to Report All" and "Report All Set". If
"Report All" is selected all reporting options will be "Enabled". Select the "Save" key to return
to the Reporter options screen.
Select "Report Alarms". The System toggles between "Disabled" and "Enabled".
Select "Report Troubles". The System toggles between "Disabled" and "Enabled".
Select "Open/Close". The System toggles between "Disabled" and "Enabled".
Select "Report Tests". The System toggles between "Disabled" and "Enabled".
SIA: The L5200/L7000 default is "Enabled" and is not selectable.
Note: The Follow Me feature is not available on the LYNX Touch L7000/L7000CN.
Select "Follow Me Phone 1" to program the "Follow Me" Reminder telephone number 1
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "Phone Type". The System toggles between "None" and "Follow Me".
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "Phone Number". Enter the "Follow Me" Phone Number 1 on the displayed keypad.
ACTION
Communicator Type
- 42 -