Direct Copy - Buffalo Cloudstor CS-X series User Manual

Direct Copy

You can copy digital media files directly to CS-WX/1D
and CS-WV/1D CloudStor devices from a USB
storage device, such as a digital camera, USB flash
drive, or external hard disk.
Connect your USB device to the USB port on the back
of the CloudStor. The function LED on the front of
the unit will glow blue for 60 seconds.
While the function LED is still glowing blue, press the function button and release it. The
function LED will begin to blink as all media files on the USB device are copied to the folder on
the CloudStor selected in Device Settings/Direct Copy. When the copying is finished, the function
LED will stop blinking.
When the copy is finished, hold down the function button until the function LED glows a steady
blue. This dismounts all attached USB devices, and it's now safe to unplug your device.
Notes: The CS-X CloudStor doesn't support Direct Copy.
If the function LED does not glow blue when the device is connected, then the device is not
compatible with Direct Copy.
If no folder is selected in Device Settings/Direct Copy, then no files are copied and the function
LED will continue blinking. If this happens, hold down the function button until the drive is
dismounted.
44
Function
button