Active Copy - Buffalo Cloudstor CS-X series User Manual

Active Copy

Active Copy automatically backs up a folder to a different folder.
Source and target folders may be on your CloudStor, or on a
different CloudStor or other Pogoplug device. If you have installed
Pogoplug drive software on your computer, you can also use it
with Active Copy.
To configure Active Copy, click on Settings, then Backup. Click on
Set up Active Copy on a New Folder.
Choose the source folder, then the target folder. Click Finish when
done.
Depending on how many files are in the source folder and the
speed of the network between the two devices, it may take some
time for Active Copy to complete.
24