Buffalo Cloudstor CS-X series User Manual page 37

Sleep Schedule - Enable to configure the CloudStor to shut down during preset periods.
Maintenance - Clicking Restore restores your CloudStor to its factory default settings. Normally,
this doesn't affect data stored on the drive. However, you may choose to check Erase data before
clicking Restore, which will erase all data on the drive. Note that this will not unregister the
device. If you choose to erase data, it may take several hours to complete.
Clicking Rebuild Media Library will recreate thumbnails and re-transcode your videos and movies.
Active copy jobs to or from folders on the CloudStor will need to be restarted. This operation
cannot be stopped or reversed.
Note: Restore and Rebuild Media Library can only be used when you are connected to the
CloudStor locally.
Updates - If enabled, the CloudStor will be automatically updated with the latest firmware. This
is enabled by default. If an update results in unexpected behavior, clear your browser's cache.
Status - This gives you current system settings for your CloudStor and information about the
network.
Language - Select your language from the drop-down list on the top right side of the screen. Note:
This only changes the language for the local UI of the device. To change the language for the
Cloud UI, click Return to library and then click the language tab at the top right.
Restart CloudStor - Power cycles the device. The button is located on the right side of the top
bar.
37