System Q; Volume; Audio Control; Speaker Setting - Kenwood KDC-5021V Instruction Manual

Adjustment Item Display
Bass level "Bas"/"BAS"
Middle level "Mid"/"MID"
Treble level "Tre"/"TRE"
Balance "Bal"/"BAL"
Fader "Fad"/"FAD"
Volume offset "V-OFF"
Volume offset: Each source's volume can be set as a difference
from the basic volume.
5
Exit Audio Control mode
Press the [AUD] button.

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Speaker Setting mode
Press the [Q] button.
3
Select the Speaker type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
Range
–8 — +8
–8 — +8
–8 — +8
Left 15 — Right 15
Rear 15 — Front 15
–8 — ±0
Display
"SP OFF"
"SP 5/4"
"SP 6*9/6"
"SP OEM"
— 11 —
4
Exit Speaker Setting mode
Press the [Q] button.

TEL Mute

The audio system automatically mutes when a call comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio system comes back
ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system comes back
ON.