Table of Contents
Advertisement
3 way speaker system setup
Connect the speaker wires
Blue/White
(Power control wire)
¤
Select a crossover mode according to
how the speakers are connected. Refer
to <2-Way/3-Way Crossover Setting>
(page 15).
If you select a wrong mode:
• The speakers can break.
• The output sound level may be
extremely low.
14 | Quick Start Guide
R
L
Wiring harness
(Accessory1)
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
P.CONT
Tweeter output
R
L
Mid Range output
Woofer output
To MID Range left speaker
To MID Range right speaker
To left Tweeter
To right Tweeter
When using the optional power amplifier,
connect this wire to its power control
terminal.
If no connections are made, do not
⁄
let the wire come out from the tab.
For how to connect speaker wires
⁄
to terminals other than speaker
terminals and Preout terminals, see
<Connecting Wires to Terminals>
(page 12).
Advertisement
Table of Contents
