Application Panel - Honeywell MX9 Reference Manual

Application Panel

Use the Application tab options to select the applications to launch when the device boots up in End-user Mode.
If no application is specified when the Administrator Control Panel is closed, the mobile device reboots into Administrator
mode. If a password has been set, but an application has not been specified, the user will be prompted for the password before
entering administration mode. The password prompt remains on the display until a valid password is entered.
Option Explanation
Default is blank. Move the cursor to the Filename text box and either type the application path or tap the Browse
Filename button (the ... button). The standard Windows CE Browse dialog is displayed. After selecting the application
from the Browse dialog, tap OK.
Default is blank. Enter the Title to be associated with the application. The assumption is that multiple copies of
Title
the same application may need unique titles in order to differentiate them in the Switchpad.
Arguments Default is blank. Enter the command line parameters for the application in the Arguments text box.
Default is 1. Enter the Order in which the application is to be loaded or presented to the end-user. Applications
Order
are launched in lowest to highest number order and do not need to be sequential.
Default is Disabled. Enable the Internet checkbox to use the End-user Internet Explorer (EUIE.EXE) When the
Internet checkbox is enabled, the Internet Menu and Internet Status are available. See the section titled End-user Internet
Explorer (EUIE) for more details.
4-33