Kenmore 790.4906 Use And Care Manual page 28

Electric built-in oven
Table of Contents

Advertisement

Oven Cleaning
INSTRUCTIONS
PRESS
DISPLAY
Stopping
or interrupting
a Self-Cleaning
Cycle:
If it becomes necessary to stop or interrupt a self-cleaning
cycle
due to excessive smoke or fire in the oven:
1. Press @.
2.
Once the oven has cooled down for approximately
1 HOUR
and the "LOCK" is no longer displayed, the oven door can
then be opened (Figure 1).
@
Figure 1
Note: If your clock is set for normal 12 hour display mode the Delayed Self-Clean cycle can never be set to start more
than 12 hours in advance. To set for Delayed Self-Clean Cycle 12-24 hours in advance set the control for the 24 hour
time of day display mode.
Adjusting Oven Temperature
The temperature
in the oven has been pre-set at the factory. When first using the
oven, be sure to follow recipe times and temperatures.
If you think the oven
temperature is cooking too hot or too cool for the temperature you select, you can
adjust the actual oven temperature to be more or less than what is displayed. Before
adjusting, test a recipe by using a temperature setting that is higher or lower than the
recommended temperature. The baking results should help you to decide how much of
an adjustment is needed.
Note: The oven
temperature
adjustments
made with this feature will
not change the Self-Clean
cycle temperature.
INSTRUCTIONS
PRESS
DISPLAY
To adjust
the oven temperature
higher
t.
Press _
for 6 seconds (Figure 2).
2.
To increase the temperature
use the number pads to enter the
change.
(Example 30°F) (_
(_
(Figure 3).
desired
The
temperature
may be increased as much as 35°F (19°C).
3.
Press (_ART_ or @
to accept the temperature change
and
the display will return to the time of day (Figure 4).
To adjust
the oven temperature
lower
1.
Press _
for 6 seconds (Figure 5).
2.
To decrease the temperature
use the number pads to enter
the desired change.
(Example-30°F)
_
(_
and then
press _
(Figure 6). The temperature
may be decreased
as much as -35°F (-19°C).
3.
Press _
or @
to accept the temperature change and the
display will return to the time of day (Figure 7).
0
(Z)(Z)
( or
@
(Z)db
Q
( or
@
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
28

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite 790.4906 series

Table of Contents