Kenmore 790.4906 Use And Care Manual page 27

Oven Cleaning
To Start the delayed Self-Clean Cycle
The FLEX CLEAN _F_, DELAY START d_
pads and length of clean cycle, controls the Delayed Self-Clean operation.
v
The automatic timer will turn the oven on and off at the time you select in advance. Be sure to review TO START THE SELF-
CLEAN CYCLE for recommended clean times.
INSTRUCTIONS
To set the control for the Self=Cleaning Cycle to start
at a delayed time and shut off automatically
(example: 3 hour self=clean cycle to start at 4:30)
1. Be sure the clock is set with the correct time of day and the
oven door is closed.
2. Press _-_. "CLEAN", "[O--_" and "TIME" will flash in the
display (Figure 1).
3. To enter 3 hour, press _ @ @ on the numeric pad
(Figure 2).
4. Press _A_ ."OVEN" will appear in the display. Once the
door has locked "CLEAN", "LOCK" and "[0---_" will be
displayed (Figure 3).
5. Press _. Time will be displayed."OVEN 1" and "TIME"
will flash (Figure 4). Enter the desired start time using the
6. Press _A_. "CLEAN", "DELAY", "LOCK",
IIOVEN 1
II
and
"TIME" will be displayed (Figure 5).
7. As soon as the control is set, the motor driven oven door lock
will begin to close automatically. Once the door has been
locked the "LOCK" indicator light will go on.
8. The control will start the self-cleaning at the set start time, for
the period of time previously selected. At that time, the icon
"DELAY" will go out.
When the Self-Clean
Cycle is Completed
t. The time of day and "END" will remain in the display (Figure 6).
2. Once the oven has cooled down for approximately t HOUR, and
"END" is no longer displayed, the oven door can then be opened
(Figure 7).
PRESS DISPLAY
Q
QQd >
Figure 1
Figure 2
Figure 3
(Z)(Z)(D
Figure 4
Figure 5
Figure 6
Figure 7
27